Kavo Type Fiber Optic High Speed Tubrine 4/6 holes
Kavo Type Fiber Optic High Speed Tubrine 4/6 holes
Extract the bur from the handpiece, use the soft brush to clean the dirt, and wash with disinfection of alcohol cotton.
Lubricate the handpiece, pour two drops into the air tube one time.
Model No
FP4-D
Features
Anti-retraction, with Quick Coupling
Chuck Type
Push Button
Working Air Pressure
0.20-0.25MPa(0.22MPa preferred)
Rotation speed
350,000-400,000rmp
Bur Applicable
Φ1.595-1.600mm
Spray
Triple Water Spray
Holes
4, 2
Luminance
16000 LUX -20000 LUX
Temperature
3500 K -4000 K
Details about Kavo Type Fiber Optic High Speed Tubrine 4/6 holes
After each treatment, Sterilizing handpiece in an autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each time drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 minutes at 135℃.
Share Kavo Type Fiber Optic High Speed Tubrine 4/6 holes With Your Clients