Menu
4 Water Spray High Speed Dental Turbine Handpiece
Four water spray, make the whole operation instant cooling.
standard/torque push-button head, meet different torque requirements in operations.
Skid-resistance due to the stripe ergonomic design.
4 holes /2 holes that conform to the ISO 13485 standard.
| Model No | FN4-H |
|---|---|
| Chuck Type | Push Button |
| Working Air Pressure | 0.20-0.25MPa(0.22MPa preferred) |
| Rotation speed | 300,000-360,000rmp |
| Bur Applicable | Φ1.595-1.600mm |
| Spray | 4 Water Spray |
| Holes | 4, 2 |
Details about 4 Water Spray High Speed Dental Turbine Handpiece
After each treatment, Sterilizing handpiece in an autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each time drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 minutes at 135℃.
Share 4 Water Spray High Speed Dental Turbine Handpiece With Your Clients
Facebook
Twitter
LinkedIn
